Links and ContentWhile every effort has been made to ensure the accuracy and completeness of the information, no guarantee is given nor responsibility taken for external links or product data. Please always contact us to confirm product data.
This kit contains an operator GFA 90NM – 400V – release by hand crank – for 1″shafts, Control unit GFA TS970 – motor bracket and cable 7 meters.
Products in this set
GFA operator, 90Nm
GFA operator SE 9.24-25,40 DES NHK, without control panel, output torque 90Nm, output speed 24 rpm, shaft hole 25,4mm, IP 65, 3 x 400Volt, 50Hz, digital limit switch, limit switch range 20, hand crank.
GFA connecting cable, 7 meter
GFA connecting cable between motor en control box, equipped with plug connector, length 7 meter.
GFA control panel TS 970 N / T 961 / T 970
GFA control panel TS 970 N for SE serie operators, Integrated OPEN-STOP-CLOSE control device, UBS module with 5 plug-in points, CEE plug. For all GFA drives with digital limit switch DES.
TS 970 N IS THE REPLACEMENT FOR TS 961 AND TS 970.