Features of the Easy Top
The Easy Top is a control unit for rolling shutters, it’s compact aesthetic design is suited to domestic environments. This innovative controller is easy to set up with LCD display. Up to 1008 codes can be stored (max 252 transmitters) via the radio receiver with PHOX4 transmitters. The Easy Top is suitable for tube motors up to 300Nm, with an output of 1100W at 4.7A, as well as featuring multiple safety inputs from both wired and wireless resistive and optical safety edges, photocells and safety brakes also features built on control buttons, in an Up/Stop/Down configuration. The Easy Top features an integrated remote control system, with a facility for up to 240 handsets to be programmed to a unit. The Easy Top can also be used with multi channel remotes, enabling a single handset to operate up to 4 separate shutter units. The control panel uses the Phox 4 remote controls.
Volt free version available plus many accessories including:
- Wireless safety edge (resistive & optical safety edges with test facility)
- Safety photocells
- Additional PHOX4 transmitters
- Junction boxes, curly cables
- Rubber profiles & carriers to suit many bottom lathes
Upgrades to the Easy Top
The Easy 4G has all of the same features as the Easy Top, with the inclusion of a courtesy light. This makes the Easy 4G ideal for domestic garage doors, as the light can be programmed to activate at the same time as the door, or on a delay. The Easy Opener has the same features as the Easy 4G, with the inclusion of the NOLD Bluetooth Opener that enables the end user to operate the door through a Bluetooth Smartphone app, in a secure network. The Easy Opener is ideal for domestic garages, and can also be used for other properties where access control is needed, but many people need to be able to access the property.
For more information about our Easy Top control panel, or to place an order, please contact one of our sales engineers.
Easy Top – Easy LUX Specification
|Technical Specification||230V models||120V models|
|Max Motor Load||1100W||600W|
|Max Accessories Load 30 VDC||3W||3W|
|Working Temperature||-20 ÷ 60 °C||-20 ÷ 60 °C|
|Protection Fuse||F1=5A Delayed||F1=5A Delayed|
|Dimensions||170 x 185 x 70 mm||170 x 185 x 70 mm|
|Max Motor Load||1100W|
|Max Accessories Load 30 Vdc||3W|
|Working Temperature||-20 ÷ 60 °C|
|Protection fuse||F1=5A Delayed|
|Dimensions||170 x 185 x 70 mm|
What is the Fire Rating for an Ellard Roller shutter?
It is the roller shutter that is fire rated rather than the Ellard motor. Therefore you would have to refer back to whom you bought the roller shutter from
What industrial door motors do you sell?
Here at Ellard ltd we specialise in supplying industrial door motors and supply a comprehensive range of motor types and models. This includes, direct drive, flange, sectional, garage door and tubular motors. Our selection is vast, so for a comprehensive list of our products and specifications you can visit our dedicated pages or get in touch with our expert team.
Do your traffic barriers have obstacle detection?
Yes, our Nubia traffic barrier has built in intelligent controllers which offer obstacle detection and built in lights to make them easy to see in the dark or in bad weather.
What are the benefits of direct drive motors?
Direct drive motors remove the need to use an elaborate system of cogs. This means that the full power of the motor goes straight into the pulling mechanism, making it an extremely efficient motor. Without the extra mechanisms, it also has a very low sound output comparatively to other methods.
Why should I use a fire motor as part of my fire safety plan?
Fire motors are often connected to your fire detection system and activate if fire is detected on your premises. They quickly and efficiently close helping to contain the fire and keep your employees/customers safe from the dangerous area. Government legislation requires that all fire doors must have an automatic function and all Ellard fire motors comply with the latest rules and regulations. All motors can be set to a Smoke Curtain mode, and our new Fire Door Control Panel has a panic circuit function to guarantee a means of escape.This allows you to re-open the shutter 3/4 then immediately re-close when fire alarm is still active.
Can I link specific access controls to my gate automation system?
Yes, our gate automation systems can be linked to keypads, switches, intercom systems and key switches, dependant on your specifications or security requirements. Take a look at the range of controls and accessories available for gate automation.
Can I add extra features to my sectional door drives?
Yes, we ensure that your sectional doors have easy wiring to add safety and access accessories.
What are the main applications for high speed motors?
High speed motors are used for a wide range of purposes and can increase the efficiency of companies when time is of importance. Beverage, food, car and chemical factories often use high speed motors both to increase productivity and provide a security barrier. They can also be interlocked to create a airlock function
What size strips do you supply your sliding door gear track?
Our track sections are cold rolled and in standard lengths of 2,000, 2,500 and 3,000mm and can be used for both side or top fixing. If you would like to learn more about our sliding door gear then please get in touch with our team.
Which motors are most commonly used for shutters and garage doors?
Tubular motors are the most common place motor for roller garage doors and shutters. They provide a durable, fast and quiet solution for both light and heavy applications. Tubular motors can be plugged into the mains through our easy fit panel to give you low voltage at the key switch or are backed up with battery power. Additionally, we provide garage door automation for sectional and balanced doors.