Description

 Eco-Logic Kit

• ECO-LOGIC kit is the new V2 system to supply power through a solar panel to 24V automations.
• The panel converts the solar light into electric energy, stored in the battery box.
• Allows automation of installations with the need for excavation work, saving both time and money.
• The battery box provides full autonomy to V2’s 24V systems, day and night and even after long periods of bad weather.
• In the event of batteries being fully discharged, a quick charge is available via the additional 230V power adaptor.
• The installation of the ECO-LOGIC kit with other V2 products makes it possible to implement automation devices capable of operating with solar energy.
• Three LED’s on the front of the unit indicate the charge level of the batteries.
• Two simple plug in connectors at the side of the unit provide quick and easy connection of both the control unit and solar panel (or auxiliary power supply).

Enjoy the cost and environmental benefits of a solar powered gate with the Eco-Logic Kit. The kit consists of a solar panel and battery box, as well as a quick charge system to boost power for the initial install, or as a top up after intensive usage.

To view accessories please click the link gate & barrier accessories

Technical Specification

Eco Logic Specification

FAQS

• What is the Fire Rating for an Ellard Roller shutter?

  It is the roller shutter that is fire rated rather than the Ellard motor. Therefore you would have to refer back to whom you bought the roller shutter from

• What industrial door motors do you sell?

  Here at Ellard ltd we specialise in supplying industrial door motors and supply a comprehensive range of motor types and models. This includes, direct drive, flange, sectional, garage door and tubular motors. Our selection is vast, so for a comprehensive list of our products and specifications you can visit our dedicated pages or get in touch with our expert team.

• Do your traffic barriers have obstacle detection?

  Yes, our Nubia traffic barrier has built in intelligent controllers which offer obstacle detection and built in lights to make them easy to see in the dark or in bad weather.

• What are the benefits of direct drive motors?

  Direct drive motors remove the need to use an elaborate system of cogs. This means that the full power of the motor goes straight into the pulling mechanism, making it an extremely efficient motor. Without the extra mechanisms, it also has a very low sound output comparatively to other methods.

• Why should I use a fire motor as part of my fire safety plan?

  Fire motors are often connected to your fire detection system and activate if fire is detected on your premises. They quickly and efficiently close helping to contain the fire and keep your employees/customers safe from the dangerous area. Government legislation requires that all fire doors must have an automatic function and all Ellard fire motors comply with the latest rules and regulations. All motors can be set to a Smoke Curtain mode, and our new Fire Door Control Panel has a panic circuit function to guarantee a means of escape.This allows you to re-open the shutter 3/4 then immediately re-close when fire alarm is still active.

• Can I link specific access controls to my gate automation system?

  Yes, our gate automation systems can be linked to keypads, switches, intercom systems and key switches, dependant on your specifications or security requirements. Take a look at the range of controls and accessories available for gate automation.

• Can I add extra features to my sectional door drives?

  Yes, we ensure that your sectional doors have easy wiring to add safety and access accessories.

• What are the main applications for high speed motors?

  High speed motors are used for a wide range of purposes and can increase the efficiency of companies when time is of importance. Beverage, food, car and chemical factories often use high speed motors both to increase productivity and provide a security barrier. They can also be interlocked to create a airlock function

• What size strips do you supply your sliding door gear track?

  Our track sections are cold rolled and in standard lengths of 2,000, 2,500 and 3,000mm and can be used for both side or top fixing. If you would like to learn more about our sliding door gear then please get in touch with our team.

• Which motors are most commonly used for shutters and garage doors?

  Tubular motors are the most common place motor for roller garage doors and shutters. They provide a durable, fast and quiet solution for both light and heavy applications. Tubular motors can be plugged into the mains through our easy fit panel to give you low voltage at the key switch or are backed up with battery power. Additionally, we provide garage door automation for sectional and balanced doors.

Downloads

• 
  

  Download PDFs

  Download