Skip to content
Share on facebook
Share on twitter
Share on linkedin
Share on whatsapp
Share on email
Share on print

Fire Door Control Panel FDCP



The Ellard Fire Door Control Panel gives advance warning in the event of a fire before closing the shutter or curtain, protecting both personnel and property from the effects of smoke and fire.

  • The Ellard Fire Door Control Panel (FDCP) provides a comprehensive control for industrial fire resisting roller shutters
  • Whilst maintaining the function of everyday use the FDCP gives advanced warning in the event of a fire before closing the shutter or curtain, protecting both personnel and property from the effects of smoke and fire
  • Fully featured controller and set-up functions with comprehensive closing options including Solenoid drop, Power closing and 2-stage closing
  • Can be fully interfaced with Building Management Systems (BMS)
  • Optional Repeater Panel available, includes additional sounder and high intensity LED illumination and 102db sounder
  • The FDCP controller also works with 24v and 230v Tubular Motors
  • For use on our JM Fire Motor Range which are available in single or three phase versions

For further information or to place any orders contact one of our helpful sale engineers


Technical Specification

Fire Door Control Panel Technical Spec

Large audio-visual warning ‘FIRE SHUTTER CLOSING’
Easy read display (LCD) for easy program set-up
Intelligent’ dail for easy program set-up Demo mode – for training & easy onsite set-up
2xoff 1.2 Ah rechargable batteries to maintain fire signal activation & operate brake release in the event of mains power failure
8 round top cable glands for secure cable entry
Selectable fire signal types – N/O | N/C
Selectable fire signal types – 2-30V DC
Programmable relays
Fire alarm test option
Automatic reset & opening once the fire signal is removed
Double knock for zones 1 & 2
Factory default reset option (in program mode)
Manual / Automatic opening after 1st stage closing
8k2 monitored circuit for ancillary devices (smoke detectors etc)
Comprehensive fault diagnosis with visual messages
Photocell & fire alarm input circuits continually tested in non-fire alarm mode each hour after every normal door operation
Battey level check & voltage level displayed on LCD
Fuse protection for aux support, mains supply & output relays
Auto reset on fire signal removal
Auto opening after 1st stage of 2nd stage opening
Fully CE compliant


  • What is the Fire Rating for an Ellard Roller shutter?

    It is the roller shutter that is fire rated rather than the Ellard motor. Therefore you would have to refer back to whom you bought the roller shutter from

  • What industrial door motors do you sell?

    Here at Ellard ltd we specialise in supplying industrial door motors and supply a comprehensive range of motor types and models. This includes, direct drive, flange, sectional, garage door and tubular motors. Our selection is vast, so for a comprehensive list of our products and specifications you can visit our dedicated pages or get in touch with our expert team.

  • Do your traffic barriers have obstacle detection?

    Yes, our Nubia traffic barrier has built in intelligent controllers which offer obstacle detection and built in lights to make them easy to see in the dark or in bad weather.

  • What are the benefits of direct drive motors?

    Direct drive motors remove the need to use an elaborate system of cogs. This means that the full power of the motor goes straight into the pulling mechanism, making it an extremely efficient motor. Without the extra mechanisms, it also has a very low sound output comparatively to other methods.

  • Why should I use a fire motor as part of my fire safety plan?

    Fire motors are often connected to your fire detection system and activate if fire is detected on your premises. They quickly and efficiently close helping to contain the fire and keep your employees/customers safe from the dangerous area. Government legislation requires that all fire doors must have an automatic function and all Ellard fire motors comply with the latest rules and regulations. All motors can be set to a Smoke Curtain mode, and our new Fire Door Control Panel has a panic circuit function to guarantee a means of escape.This allows you to re-open the shutter 3/4 then immediately re-close when fire alarm is still active.

  • Can I link specific access controls to my gate automation system?

    Yes, our gate automation systems can be linked to keypads, switches, intercom systems and key switches, dependant on your specifications or security requirements. Take a look at the range of controls and accessories available for gate automation.

  • Can I add extra features to my sectional door drives?

    Yes, we ensure that your sectional doors have easy wiring to add safety and access accessories.

  • What are the main applications for high speed motors?

    High speed motors are used for a wide range of purposes and can increase the efficiency of companies when time is of importance. Beverage, food, car and chemical factories often use high speed motors both to increase productivity and provide a security barrier. They can also be interlocked to create a airlock function

  • What size strips do you supply your sliding door gear track?

    Our track sections are cold rolled and in standard lengths of 2,000, 2,500 and 3,000mm and can be used for both side or top fixing. If you would like to learn more about our sliding door gear then please get in touch with our team.

  • Which motors are most commonly used for shutters and garage doors?

    Tubular motors are the most common place motor for roller garage doors and shutters. They provide a durable, fast and quiet solution for both light and heavy applications. Tubular motors can be plugged into the mains through our easy fit panel to give you low voltage at the key switch or are backed up with battery power. Additionally, we provide garage door automation for sectional and balanced doors.


Related Products

Category Filter