Skip to content
Share on facebook
Share on twitter
Share on linkedin
Share on whatsapp
Share on email
Share on print


SKU 2090958663 Category


GENESIS Remote Control Kit

The Genesis Kit is a standalone remote control system. It is ideal for situations where a preexisting door requires upgrading to a remote control system, or new builds where remote controls are required and not built in to the control panel. The Genesis system consists of a receiver and keyring sized transmitters, allowing property keyholders to operate the door shutter or gate as part of their opening or closing routine. The system allows the use of up to 100 transmitter memory, allowing multiple people to control the door. Each remote control kit comes complete with two handsets.

Genesis Controller

Features/Benefit of the Genesis Controller

  • Comes complete with two transmitters
  • 100 transmitters memory
  • Can come pre-wired with 1.5m plug
  • Fully complaint photocell safety circuit
  • Large visual power and signal indicators
  • Aesthetically designed to blend into most surroundings
  • White Athena transmitter works with the Genesis
  • Operating range 30m (approx)
  • Power supply 230v 50hz 1ph
  • Max motor load of up to 500W
  • Easy to wire in, with more space than the Athena
  • Volt free version available to expand functions of basic 3rd party controllers (Modification by Ellard)
  • Dedicated connections for safety break, external push button station/key switch and photocell
  • Secure 5-way cable clamping system

Additional Information

If using a remote control with an ‘impulse down’ set up, it is essential that safety devices are fitted, to protect both people and vehicles.

To learn more about the Genesis control, or to place an order, please contact one of our sales engineers.

Technical Specification

Athena-Genesis Technical Specification

Genesis Technical Specification  
Power Supply 200 – 240V AC, 50Hz
Operating Temprature -10 to 55°c
Frequency 433Mhz
Max Transmitters 50
Transmitter Distance >30m
Max Power 500W
Athena 2nd Generation  
Power Supply 100 – 240V AC, 50Hz
Operating Temprature -10 to 55°c
Frequency 433Mhz
Max Transmitters 50
Transmitter Distance >30m (free sight)
Max Power 500W


  • What is the Fire Rating for an Ellard Roller shutter?

    It is the roller shutter that is fire rated rather than the Ellard motor. Therefore you would have to refer back to whom you bought the roller shutter from

  • What industrial door motors do you sell?

    Here at Ellard ltd we specialise in supplying industrial door motors and supply a comprehensive range of motor types and models. This includes, direct drive, flange, sectional, garage door and tubular motors. Our selection is vast, so for a comprehensive list of our products and specifications you can visit our dedicated pages or get in touch with our expert team.

  • Do your traffic barriers have obstacle detection?

    Yes, our Nubia traffic barrier has built in intelligent controllers which offer obstacle detection and built in lights to make them easy to see in the dark or in bad weather.

  • What are the benefits of direct drive motors?

    Direct drive motors remove the need to use an elaborate system of cogs. This means that the full power of the motor goes straight into the pulling mechanism, making it an extremely efficient motor. Without the extra mechanisms, it also has a very low sound output comparatively to other methods.

  • Why should I use a fire motor as part of my fire safety plan?

    Fire motors are often connected to your fire detection system and activate if fire is detected on your premises. They quickly and efficiently close helping to contain the fire and keep your employees/customers safe from the dangerous area. Government legislation requires that all fire doors must have an automatic function and all Ellard fire motors comply with the latest rules and regulations. All motors can be set to a Smoke Curtain mode, and our new Fire Door Control Panel has a panic circuit function to guarantee a means of escape.This allows you to re-open the shutter 3/4 then immediately re-close when fire alarm is still active.

  • Can I link specific access controls to my gate automation system?

    Yes, our gate automation systems can be linked to keypads, switches, intercom systems and key switches, dependant on your specifications or security requirements. Take a look at the range of controls and accessories available for gate automation.

  • Can I add extra features to my sectional door drives?

    Yes, we ensure that your sectional doors have easy wiring to add safety and access accessories.

  • What are the main applications for high speed motors?

    High speed motors are used for a wide range of purposes and can increase the efficiency of companies when time is of importance. Beverage, food, car and chemical factories often use high speed motors both to increase productivity and provide a security barrier. They can also be interlocked to create a airlock function

  • What size strips do you supply your sliding door gear track?

    Our track sections are cold rolled and in standard lengths of 2,000, 2,500 and 3,000mm and can be used for both side or top fixing. If you would like to learn more about our sliding door gear then please get in touch with our team.

  • Which motors are most commonly used for shutters and garage doors?

    Tubular motors are the most common place motor for roller garage doors and shutters. They provide a durable, fast and quiet solution for both light and heavy applications. Tubular motors can be plugged into the mains through our easy fit panel to give you low voltage at the key switch or are backed up with battery power. Additionally, we provide garage door automation for sectional and balanced doors.


Related Products

Category Filter