Share on facebook
Share on twitter
Share on linkedin
Share on whatsapp
Share on email
Share on print

High Speed Motor VDA / FEIG PANEL

SKU 1443219228 Category

Description

Features of the VDA High Speed Motors

  • Fitted with the new FEIG controller c/w inverter
  • High speed motors may be mounted horizontally or vertically
  • Three gear box sizes available (48, 125 and 180 Nm)
  • Short Hand Crank (KU)
  • Thermal protection in the motor winding
  • Solid light-weight housing made from cast aluminium
  • Wear resistant, low noise, phosphor bronze worm gears
  • Soft start and close feature,minimising damage to the door and wear to the motor
  • 60% Duty Ratio allowing up to 20 operations per hour for Heavy Duty version allowing up to 30 operations per hour

Features of the FEIG Controller

  • Control system for motor driven industrial or commercial doors in accordance with the EN13241
  • Mains supply 1 phase 230V AC, 16A
  • Programmable inputs & outputs
  • Control the position of the door (open , close and intermediate positions) plus the speed of the motor
  • Monitoring of security sensors e.g safety edges , safety sensors & light curtains
  • Diagnostic messages for easy fault finding
  • Interlocking / Function Airlock
  • Facility for accessories
  • Traffic light control available via internal relays

Technical Specification

High Speed VDA

High Speed VDA        
Description VDA 48.94 VDA 95-93 VDA 125-93 VDA 180-93
Shaft (mm) 30 30 40 40
Max Torque 48Nm 95Nm 125Nm 180Nm
Output (rpm) 94 93 93 93
Manual Override KU/KE KU/KE KU/KE KU/KE
Operating voltage 230v/1ph/50Hz 230v/1ph/50Hz 230v/1ph/50Hz 230v/1ph/50Hz
Duty Cycle 60%* 60%* 60%* 60%*
Protection (IP) IP54 IP54 IP54 IP54
Weight (Kg) 13 29 32

FAQS

  • What is the Fire Rating for an Ellard Roller shutter?

    It is the roller shutter that is fire rated rather than the Ellard motor. Therefore you would have to refer back to whom you bought the roller shutter from

  • What industrial door motors do you sell?

    Here at Ellard ltd we specialise in supplying industrial door motors and supply a comprehensive range of motor types and models. This includes, direct drive, flange, sectional, garage door and tubular motors. Our selection is vast, so for a comprehensive list of our products and specifications you can visit our dedicated pages or get in touch with our expert team.

  • Do your traffic barriers have obstacle detection?

    Yes, our Nubia traffic barrier has built in intelligent controllers which offer obstacle detection and built in lights to make them easy to see in the dark or in bad weather.

  • What are the benefits of direct drive motors?

    Direct drive motors remove the need to use an elaborate system of cogs. This means that the full power of the motor goes straight into the pulling mechanism, making it an extremely efficient motor. Without the extra mechanisms, it also has a very low sound output comparatively to other methods.

  • Why should I use a fire motor as part of my fire safety plan?

    Fire motors are often connected to your fire detection system and activate if fire is detected on your premises. They quickly and efficiently close helping to contain the fire and keep your employees/customers safe from the dangerous area. Government legislation requires that all fire doors must have an automatic function and all Ellard fire motors comply with the latest rules and regulations. All motors can be set to a Smoke Curtain mode, and our new Fire Door Control Panel has a panic circuit function to guarantee a means of escape.This allows you to re-open the shutter 3/4 then immediately re-close when fire alarm is still active.

  • Can I link specific access controls to my gate automation system?

    Yes, our gate automation systems can be linked to keypads, switches, intercom systems and key switches, dependant on your specifications or security requirements. Take a look at the range of controls and accessories available for gate automation.

  • Can I add extra features to my sectional door drives?

    Yes, we ensure that your sectional doors have easy wiring to add safety and access accessories.

  • What are the main applications for high speed motors?

    High speed motors are used for a wide range of purposes and can increase the efficiency of companies when time is of importance. Beverage, food, car and chemical factories often use high speed motors both to increase productivity and provide a security barrier. They can also be interlocked to create a airlock function

  • What size strips do you supply your sliding door gear track?

    Our track sections are cold rolled and in standard lengths of 2,000, 2,500 and 3,000mm and can be used for both side or top fixing. If you would like to learn more about our sliding door gear then please get in touch with our team.

  • Which motors are most commonly used for shutters and garage doors?

    Tubular motors are the most common place motor for roller garage doors and shutters. They provide a durable, fast and quiet solution for both light and heavy applications. Tubular motors can be plugged into the mains through our easy fit panel to give you low voltage at the key switch or are backed up with battery power. Additionally, we provide garage door automation for sectional and balanced doors.

Downloads

Related Products