Skip to content
Share on facebook
Share on twitter
Share on linkedin
Share on whatsapp
Share on email
Share on print

Pattern Mk4 / F-Type Spring – Strength One


Pattern Mk4 / F-Type Spring – Strength One

Our Pattern Garador Mk4 / F-Type springs have been manufactured using high impact plastic tubes for improved performance.


Mk4 / F-Type springs are identified by a number which is punched into the screw in tag at the top of the spring on more recent springs. Whereas on early springs there is no screw in tag, just two loops of spring wire. The number on these early springs is found on the side of the white plastic collar.

Please view or download the spring identification chart here to assist you in ordering the correct spring for the door being repaired. We strongly recommend replacing these springs in pairs as often the other spring is not far from the end of its serviceable life anyway.

Please note: These springs are made to match the original part and should not be compared to inferior “generic” products available elsewhere.

Download Fitting Instructions

Related Products

Category Filter