Skip to content
Share on facebook
Share on twitter
Share on linkedin
Share on whatsapp
Share on email
Share on print

Photocells

SKU 1407641627 Category

Description

Ellard offer a range of wall or pillar mounted photocells designed for all environments

SENSIVA

  • Extremely narrow width, just 43mm
  • Adjustable by 30°
  • Synchronised – this allows the installation of two pairs of photocells without them interfering with one another.
  • Secure – immune to interference from the sun
  • Shockproof polycarbonate body

SENSIVA XS

  • Very small size (84x29x24mm)
  • Adhesive filter to simulate adverse weather conditions and  ensure optimum operation of the system
  • Dip switches to enable synchronized operation and the snow function
  • LED indicator to simply the alignment of the photocells

SENSIVA 180

  • Adjustable up to 180° on the horizontal axis and 30° on the vertical axis
  • Secure: immune to interference from sunlight
  • Dip-switches to enable synchronized operation and the snow function

SENSIVA PLUS

  • Ability to set 8 different transmission codes to simultaneously use 8 pairs of photocells without mutual interfaces
  • LED indicator to simplify the alignment of the photocells

SENSIVA WL

  • Possibility to connect resistive or traditional safety edge on the transmitter
  • Automatic signal detection which slows down in the event of snow to avoid undesired activations caused by the fall of the flakes
  • LED light to show when the battery is low

Shield 180

  • Shockproof aluminium cover
  • Secure: immune to interferance from sunlight
  • Synchronised: this allows the installation of two pairs of very close photocells, without them interfering with one another
  • For further details, read more here.

Do you require training on any Ellard products? Contact one of the Sales and Marketing Team today for more information.

Technical Specification

Sensiva specification

Sensiva    
Features Units  
Power supply V/ Hz 12÷24
Optical range m 25
Modulated Infrared Hz 833Hz
Consumpsion mA TX 20 mA RX 25 mA
Relay contract capacity A 1A max 30 Vdc
Working tempreture °C -20 ÷ 60
Dimensions mm 36x43x90
     
Sensiva – 180    
Features Units  
Power supply Vac/dc 12÷24 Vac / 12÷36 Vdc
Optical range m 20
Modulated Infrared Hz 833
Relay contract capacity A 1A max 30 Vdc
Working temperature °C -20 ÷ 60
Dimensions mm 115x41x38
     
Sensiva – XS    
Features Units  
Power supply Vac/dc 12÷24 Vac / 12÷36 Vdc
Optical range m 20
Modulated Infrared Hz 833
Relay contract capacity A 1A max 30 Vdc
Working tempreture °C -20 ÷ 60
Dimensions mm 84x29x24
     
Sensiva-Plus    
Features Units  
Power supply Vac/dc 12÷24 Vac / 12÷36 Vdc
Optical range m 20
Modulated Infrared Hz 833
Relay contract capacity A 1A max 30 Vdc
Working temperature °C -20 ÷ 60
Dimensions mm 115x41x38
     
Sensiva -WL    
Features Units  
TX power supply (battery) 2 batt. 1,5V AAA
RX power supply Vac/dc 12÷24 Vac / 12÷36 Vdc
Optical range m 20
Modulated Infrared Hz 833
Relay contract capacity A 1A max 30 Vdc
Working temperature °C -20 ÷ 60
Dimensions mm 115x41x38
     
Shield 180    
Features Units  
Power supply Vac/dc 12÷24 Vac / 12÷36 Vdc
Optical range m 20
Relay contracts capacity A 1 (max 30 Vdc)
Working tempreture °C -20 ÷ 60
Dimensions mm 74 x 141 x 55
Protection degree IP 55
     
Omron Reflective Photcell    
Supply voltage 24 to 240 VAC(50/60Hz)
Temperature °C operations: -25 to 55
Degree of protection IP64

FAQS

  • What is the Fire Rating for an Ellard Roller shutter?

    It is the roller shutter that is fire rated rather than the Ellard motor. Therefore you would have to refer back to whom you bought the roller shutter from

  • What industrial door motors do you sell?

    Here at Ellard ltd we specialise in supplying industrial door motors and supply a comprehensive range of motor types and models. This includes, direct drive, flange, sectional, garage door and tubular motors. Our selection is vast, so for a comprehensive list of our products and specifications you can visit our dedicated pages or get in touch with our expert team.

  • Do your traffic barriers have obstacle detection?

    Yes, our Nubia traffic barrier has built in intelligent controllers which offer obstacle detection and built in lights to make them easy to see in the dark or in bad weather.

  • What are the benefits of direct drive motors?

    Direct drive motors remove the need to use an elaborate system of cogs. This means that the full power of the motor goes straight into the pulling mechanism, making it an extremely efficient motor. Without the extra mechanisms, it also has a very low sound output comparatively to other methods.

  • Why should I use a fire motor as part of my fire safety plan?

    Fire motors are often connected to your fire detection system and activate if fire is detected on your premises. They quickly and efficiently close helping to contain the fire and keep your employees/customers safe from the dangerous area. Government legislation requires that all fire doors must have an automatic function and all Ellard fire motors comply with the latest rules and regulations. All motors can be set to a Smoke Curtain mode, and our new Fire Door Control Panel has a panic circuit function to guarantee a means of escape.This allows you to re-open the shutter 3/4 then immediately re-close when fire alarm is still active.

  • Can I link specific access controls to my gate automation system?

    Yes, our gate automation systems can be linked to keypads, switches, intercom systems and key switches, dependant on your specifications or security requirements. Take a look at the range of controls and accessories available for gate automation.

  • Can I add extra features to my sectional door drives?

    Yes, we ensure that your sectional doors have easy wiring to add safety and access accessories.

  • What are the main applications for high speed motors?

    High speed motors are used for a wide range of purposes and can increase the efficiency of companies when time is of importance. Beverage, food, car and chemical factories often use high speed motors both to increase productivity and provide a security barrier. They can also be interlocked to create a airlock function

  • What size strips do you supply your sliding door gear track?

    Our track sections are cold rolled and in standard lengths of 2,000, 2,500 and 3,000mm and can be used for both side or top fixing. If you would like to learn more about our sliding door gear then please get in touch with our team.

  • Which motors are most commonly used for shutters and garage doors?

    Tubular motors are the most common place motor for roller garage doors and shutters. They provide a durable, fast and quiet solution for both light and heavy applications. Tubular motors can be plugged into the mains through our easy fit panel to give you low voltage at the key switch or are backed up with battery power. Additionally, we provide garage door automation for sectional and balanced doors.

Downloads

Related Products

Category Filter