The V2 App Tool is very simple to use all you need to do is plug the BT01 Bluetooth Module into the V2 control units that has a ADI-port. You are then able to download the app from the Google Play Store the free download app is available for IOS and Android smartphones
The V2 App Tool allows you to configure different parameters of the control unit in a very simple format. This is an App which is developed by V2 mainly for installers. By using the Bluetooth Module BT01 and the V2 App this allows you to set the control units using your mobile smart phone.
Gate test: Allows you to command the control unit to open or close the gate
Rename module: Allows you to rename the BT01 module
Send file via email: Allows you to send an email to V2 support with attached configuration or an event list that was stored in the control unit
Change access code: Allows you to change the access code associated to the BT01 module
Once you have completed the searching procedure and you have been able to establish a connection with the BT01 module the V2 App allows you to:
Control unit configuration: Once the connection is established the control unit configuration automatically identifies the control unit
Retrieve events history: This is where the event list automatically loads
Once all this information has been retrieved you are then able to save the records this then closes the connection with the control unit
Control unit firmware update: This is where you are able to download and update the control unit firmware however to do this you have to make sure you have a mobile or wireless connection for this to work. Once the download is completed the V2 App closes the connection with the control unit.
For more information on this product or to place an order contact our sales team alternatively you can visit V2 quick guide
It is the roller shutter that is fire rated rather than the Ellard motor. Therefore you would have to refer back to whom you bought the roller shutter from
Here at Ellard ltd we specialise in supplying industrial door motors and supply a comprehensive range of motor types and models. This includes, direct drive, flange, sectional, garage door and tubular motors. Our selection is vast, so for a comprehensive list of our products and specifications you can visit our dedicated pages or get in touch with our expert team.
Yes, our Nubia traffic barrier has built in intelligent controllers which offer obstacle detection and built in lights to make them easy to see in the dark or in bad weather.
Direct drive motors remove the need to use an elaborate system of cogs. This means that the full power of the motor goes straight into the pulling mechanism, making it an extremely efficient motor. Without the extra mechanisms, it also has a very low sound output comparatively to other methods.
Fire motors are often connected to your fire detection system and activate if fire is detected on your premises. They quickly and efficiently close helping to contain the fire and keep your employees/customers safe from the dangerous area. Government legislation requires that all fire doors must have an automatic function and all Ellard fire motors comply with the latest rules and regulations. All motors can be set to a Smoke Curtain mode, and our new Fire Door Control Panel has a panic circuit function to guarantee a means of escape.This allows you to re-open the shutter 3/4 then immediately re-close when fire alarm is still active.
Yes, our gate automation systems can be linked to keypads, switches, intercom systems and key switches, dependant on your specifications or security requirements. Take a look at the range of controls and accessories available for gate automation.
Yes, we ensure that your sectional doors have easy wiring to add safety and access accessories.
High speed motors are used for a wide range of purposes and can increase the efficiency of companies when time is of importance. Beverage, food, car and chemical factories often use high speed motors both to increase productivity and provide a security barrier. They can also be interlocked to create a airlock function
Our track sections are cold rolled and in standard lengths of 2,000, 2,500 and 3,000mm and can be used for both side or top fixing. If you would like to learn more about our sliding door gear then please get in touch with our team.
Tubular motors are the most common place motor for roller garage doors and shutters. They provide a durable, fast and quiet solution for both light and heavy applications. Tubular motors can be plugged into the mains through our easy fit panel to give you low voltage at the key switch or are backed up with battery power. Additionally, we provide garage door automation for sectional and balanced doors.
Copyright 2020 – All rights reserved
Door Spares UK Ltd | Company Registration: SC647824